OpenZFS backed NFS server: Part 1 — Creating a Server

Chưa phân loại
If you are familiar with OpenZFS, you know all about its feature rich interface, flexible architecture, reliable checksums and COW mechanisms. Maybe you also want it on your desktop, but you don’t want to reformat your existing disks and partitions. Maybe, you are using Windows 10, which doesn’t support OpenZFS, yet. Well in this blog post, I will discuss how you can create a Network File System, or NFS, running in a seperate server. This NFS device can then be mounted on your desktop workstation. This way you can have the reliability and robustness of ZFS with the user friendliness of your favorite Desktop OS, since NFS is available across all platforms.

I will detail the creation of NFS mount point on a Windows 10 client in the Part 2 of this series. For now let’s focus on an Ubuntu server offering NFS storage and a Ubuntu client trying to connect to it.

The Setup

My NFS server is going to be based on Ubuntu 18.04 LTS. You can use your favorite Linux distro or FreeBSD, or any other OS that supports OpenZFS. My reason for using Ubuntu 18.04 is that it is quite popular and would considerably reduce the barrier of entry.

The NFS is supposed to be available only on my LAN which has the subnet mask of and as its default gateway. In plain English, this means that all the devices connected to my home network (WiFi and Ethernet, et al) will have IP addresses ranging from through

The NFS server will be configured to allow only devices with only the aforementioned IP address to be have access to the NFS server. This would ensure that only devices which have connected to my LAN are accessing my files and the outside world can’t access it. If you have an ‘open Wifi’ setup or if the security on your router’s endpoint is dubious, this would not guarantee any security.

I wouldn’t recommend running NFS over public internet without additional security measure.

Lastly, the commands being run on the NFS server have the prompt, server $ and  the commands to be run on the client side have the prompt client $

Creating OpenZFS pool and Dataset

1. Creating zpool

If you already have a zpool up and running, skip this step. On my NFS server, which is running Ubuntu 18.04 LTS server, I first install OpenZFS.

server $ sudo apt install zfsutils-linux

Next we will list all the available block devices, to see the new disks (and partitions) waiting to be formatted with zfs.

$ lsblk

loop0    7:0    0 89.5M  1 loop /snap/core/6130
loop1    7:1    0 86.9M  1 loop /snap/core/4917
loop2    7:2    0 91.1M  1 loop /snap/core/6259
sda      8:0    0   50G  0 disk
├─sda1   8:1    0    1M  0 part
└─sda2   8:2    0   50G  0 part /
sdb      8:16   0  931G  0 disk
sdc      8:32   0  931G  0 disk
sr0     11:0    1 1024M  0 rom

A typical example is shown above, but your naming convention might be wildly different. You will have to use your own judgement, and be very careful about it. You don’t want to accidentally format your OS disk. For example, the sda1 partition clearly has the root filesystem as its mount point so it is not wise to touch it. If you are using new disks, chances are they won’t have a mount point or any kind of partitioning.

Once you know the name of your devices, we will use zpool create command to format a couple of these block devices (called sdb and sdc) into a zpool with a single vdev that is made up of two mirrored disk.

server $ sudo zpool create tank mirror sdb sdc
server $ sudo zpool status tank

zpool status tank
pool: tank
state: ONLINE
scan: none requested

tank        ONLINE       0     0     0
mirror-0  ONLINE       0     0     0
sdb     ONLINE       0     0     0
sdc     ONLINE       0     0     0

errors: No known data errors

Moving forward, you can add disks in sets of two (called vdev) to grow the size of this zpool, the new disks will show up as mirror-1, mirror-2 etc. You don’t have to create your zpool the way I did, you can use mirroring with more disks, you can use striping without redundancy but better performance, or you can use RAIDZ. You can learn more about it here.

At the end of the day, what matters is that we have created a zpool named tank. Upon which the shared NFS will live. Let’s create a dataset that will be shared. First make sure that the pool, named ‘tank’, is mounted. Default mount point is ‘/tank’ .

server $ sudo zfs mount tank
server $ sudo zfs create tank/nfsshare #create a new dataset on top of the pool

Setting Permissions

When sharing an NFS directory, the superuser on the client system doesn’t have access to anything on the share. While the client-side superuser is capable of doing anything on the client machine, the NFS mount is technically not a part of the client machine. So allowing operations on behalf of the client-side superuser mapped as server-side superuser could result in security issues. By default, NFS maps the client-side superuser actions to nobody:nogroup user and user group. If you intend on accessing the mounted files as root, then dataset on our NFS server should also have the same permissions,

server $ sudo chown nobody:nogroup /tank/nfsshare

The NFS server will run any action by the client-side root as user nobody, so the above permission will allow the operations to go through.

If you are using a different (regular) username, it is often convenient to have a user with the same exact username on both sides.

Creating NFS share

Once you have Zpool created, you should install the nfs server package from your package manager:

server $ sudo apt install nfs-kernel-server

Traditionally, NFS server uses /etc/exports file to get as list of approved clients and the files they will have access to. However, we will be using ZFS’ inbuilt feature to achieve the same.

Simply use the command:

server $ sudo zfs set sharenfs=”on” /tank/nfsshare

Earlier, I alluded to giving only certain IPs the access. You can do so as following:

server $ sudo zfs set sharenfs="rw=@" tank/nfsshare

The ‘rw’ stands for read-write permissions, and that is followed by the range of IPs. Make sure that the port number 111 and 2049 are open on your firewall. If you are using ufw, you can check that by running:

server $ ufw status

Make a note of your server’s IP on the LAN, by using ifconfig or ip addr command. Let’s call it server.ip

Client Side Mounting

Once the share is created, you can mount it on your client machine, by running the command:

client $ mount -t nfs  server.ip:/tank/nfsshare /mnt

This will mount the NFS share on /mnt folder but you could have just as easily picked any other mount point of your choice.


File sharing is probably the most important aspect of system administration. It is improves your understanding of the storage stack, networking, user permissions and privileges. You will quickly realize the importance of Principle of Least Privilege — That is to say, only give a user the barest possible access that it needs to its job.

You will also learn about the interoperability between different operating systems. Windows users can access NFS files, so can the Mac and BSD users. You can’t restrict yourself to one OS when dealing with a network of machines all having their own conventions and vernacular. So go ahead and experiment with your NFS share. I hope you learned something.

ONET IDC thành lập vào năm 2012, là công ty chuyên nghiệp tại Việt Nam trong lĩnh vực cung cấp dịch vụ Hosting, VPS, máy chủ vật lý, dịch vụ Firewall Anti DDoS, SSL… Với 10 năm xây dựng và phát triển, ứng dụng nhiều công nghệ hiện đại, ONET IDC đã giúp hàng ngàn khách hàng tin tưởng lựa chọn, mang lại sự ổn định tuyệt đối cho website của khách hàng để thúc đẩy việc kinh doanh đạt được hiệu quả và thành công.
Bài viết liên quan

How to Install a .deb File on Ubuntu

Different software of Linux used to be distributed as only source code many years ago. We had to compile the software from...

The UFW Guide — A 5-Part Series Understanding Firewalls

Uncomplicated Firewall, or UFW, is a simple and easy to use Firewall interface written in Python. It is quite popular in...

[Event Viewer] [Log] [Lý Thuyết] Cách tìm nhật ký shutdown trong Windows 10,Windows server 2012,2016

Nếu bạn tò mò muốn biết lý do tại sao máy tính của bạn bị tắt và những gì đã xảy ra chính...
Bài Viết

Bài Viết Mới Cập Nhật

mua Proxy riêng ở đâu, và nó đem lại lợi ích gì cho người sử dụng

Hướng dẫn sử dụng Proxy Helper Fakeip khi thuê proxy


Mua Proxy Nuôi Zalo Giá Rẻ Tại