Understanding Load Average on Linux

Chưa phân loại
Load average is a measurement of the amount of work versus free CPU cycles available on a system processor. In this article I’ll define the term, demonstrate how Linux calculates this value, then provide insight into how to interpret system load.

Different Methods of Calculating Load

Before we dive into Linux load averages, we must explore the different ways load is calculated and address the most common measurement of CPU load – a percentage.

Windows calculates load differently from Linux, and since Windows has been historically more popular on the desktop, the Windows definition of load is generally understood by most computer users. Most Windows users have seen the system load in the task manager displayed as a percentage ranging from 0% to 100%.

In Windows this is derived by examining how “busy” the System Idle Process is and using the inverse to represent the system load. For example, if the idle thread is executing 99% of the time, CPU load in Windows would be 1%. This value is easy to understand but provides less overall detail about the true status of the system.

In Linux, the load average is instead is represented by a decimal number starting at 0.00. The value can be roughly defined as the number of processes over the past minute that had to wait their turn for execution. Unlike Windows, Linux load average is not an instant measurement. Load is given in three values – the one minute average, the five minute average, and the fifteen minute average.

Understanding Load Average in Linux

At first, this extra layer of detail seems unnecessary if you simply want to know the current state of CPU load in your system. But since the averages of three time periods are given, rather than an instant measurement, you can get a more complete idea of the change of system load over time in a single glance of three numbers

Displaying the load average is simple. On the command line, you can use a variety of commands. I simply use the “w” command:

root@virgo [~]# w
21:08:43 up 38 days,  4:344 users,  load average: 3.11, 2.75, 2.70

The rest of the command will display who’s logged on and what they’re executing, but for our purposes this information is irrelevant so I’ve clipped it from the above display.

In an ideal system, no process should be held up by another process (or thread), but in a single processor system, this occurs when the load goes above 1.00.

The words “single processor system” are incredibly important here. Unless you’re running an ancient computer, your machine probably has multiple CPU cores. In the machine I’m on, I have 16 cores:

root@virgo [~]# nproc

In this case, a load average of 3.11 is not alarming at all. It simply means that a bit more than three processes were ready to execute and CPU cores were present to handle their execution. On this particular system, the load would have to reach 16 to be considered at “100%”.

To translate this to a percent-based system load, you could use this simple, if not obtuse, command:

cat /proc/loadavg | cut -c 14 | echo "scale=2; ($(</dev/stdin)/`nproc`)*100" | bc -l

This command sequences isolates the 1-minute average via cut and echos it, divided by the number of CPU cores, through bc, a command-line calculator, to derive the percentage.

This value is by no means scientific but does provide a rough approximation of CPU load in percent.

A Minute to Learn, a Lifetime to Master

In the previous section I put the “100%” example of a load of 16.0 on a 16 CPU core system in quotes because the calculation of load in Linux is a bit more nebulous than Windows. The system administrator must keep in mind that:

  • Load is expressed in waiting processes and threads
  • It is not an instantaneous value, rather an average, and
  • It’s interpretation must include the number of CPU cores, and
  • May over-inflate I/O waits like disk reads

Because of this, getting a handle of CPU load on a Linux system is not entirely an empirical matter. Even if it were, CPU load alone is not an adequate measurement of overall system resource utilization. As such, an experienced Linux administrator will consider CPU load in concert with other values such as I/O wait and the percentage of kernel versus system time.

I/O Wait

I/O wait is most easily seen via the “top” command:

In the screenshot above I have highlighted the I/O wait value. This is a percentage of time that the CPU was waiting on input or output commands to complete. This is usually indicative of high disk activity. While a high wait percentage alone may not significantly degrade CPU-bound tasks, it will reduce I/O performance for other tasks and will make the system feel sluggish.

High I/O wait without any obvious cause might indicate a problem with a disk. Use the “dmesg” command to see if any errors have occurred.

Kernel vs. System Time

The above highlighted values represent the user and kernel (system) time. This is a breakdown of the overall consumption of CPU time by users (i.e. applications, etc.) and the kernel (i.e. interaction with system devices). Higher user time will indicate more CPU usage by programs where higher kernel time will indicate more system-level processing.

A Fairly Average Load

Learning the relationship of load average to actual system performance takes time, but before long you’ll see a distinct correlation. Armed with the intricacies of system performance metrics, you’ll be able to make better decisions about hardware upgrades and program resource utilization.

ONET IDC thành lập vào năm 2012, là công ty chuyên nghiệp tại Việt Nam trong lĩnh vực cung cấp dịch vụ Hosting, VPS, máy chủ vật lý, dịch vụ Firewall Anti DDoS, SSL… Với 10 năm xây dựng và phát triển, ứng dụng nhiều công nghệ hiện đại, ONET IDC đã giúp hàng ngàn khách hàng tin tưởng lựa chọn, mang lại sự ổn định tuyệt đối cho website của khách hàng để thúc đẩy việc kinh doanh đạt được hiệu quả và thành công.
Bài viết liên quan

Golang Logrus Package

In this lesson on Logrus package in Golang, we will study various examples on how effective Logging can be done in Go and...

Rambox – Free Messaging & Emailing Application

Rambox is a free and open-source messaging and emailing app that allows you to combine most commonly used web applications...

How to Install GNOME 3 Extensions on Ubuntu 18.04 LTS

Ubuntu 18.04 LTS now by default uses the GNOME 3 desktop environment. The GNOME 3 desktop environment is nice looking,...
Bài Viết

Bài Viết Mới Cập Nhật


Mua Proxy v6 US Private chạy PRE, Face, Insta, Gmail

Mua shadowsocks và hướng dẫn sữ dụng trên window

Tại sao Proxy Socks lại được ưa chuộng hơn Proxy HTTP?

Mua thuê proxy v4 nuôi zalo chất lượng cao, kinh nghiệm tránh quét tài khoản zalo