Check Open Ports

Enter an IP or domain and the ports to test. ONET servers will initiate a TCP connection to each port from the Internet, exactly as an external user or your application would.

Quick select:

What do open, refused, and timed out ports mean?

An open port means a service is accepting connections, refused means the server is running but no service is listening on that port, and timed out usually means a firewall is blocking it or the IP is incorrect.

ResultMeaning
OpenA service is listening and accepting connections. The TCP handshake time is displayed alongside.
RefusedThe server is running, but no service is listening on that port.
Timed OutNo response within 4 seconds: the port is blocked by a firewall, the host is offline, or the IP is incorrect.

When should you check ports?

You should check ports when services on a VPS or proxy cannot be reached from the outside, or after configuring firewalls and NAT and wanting to verify.

  • You just set up a service on your VPS (web, game, proxy) but cannot connect from the outside.
  • Your proxy reports connection failure: check if the proxy port is open before suspecting an incorrect password.
  • You opened a firewall or configured router NAT and want to verify access from the outside.

Ready-to-Use Proxies with Open Ports

ONET dedicated IPv4 proxies come with automatic activation, displaying ip:port:user:pass directly in the dashboard—no manual port forwarding or server setup required.

Dedicated IPv4 proxies in 9 countries from 20.000 ₫/IP/month

View dedicated IPv4 proxy pricing

Frequently Asked Questions

The port shows open here, but my computer still cannot connect?+

The tool tests from servers in Vietnam. Your corporate network, ISP, or antivirus software may still block outbound connections on that port.

Can I scan all 65.535 ports?+

No. You can only check up to 8 specified ports at a time, and rate limits apply per IP to prevent the tool from being used to scan third-party networks.

Can it check UDP ports?+

No. UDP does not use a handshake, so it is impossible to reliably determine whether a port is open from the outside; this tool checks TCP only.